Panasonic NV-MV22GN User Manual

Page 15

Advertising
background image

15

LSQT0879

Confirming the cassette which includes a
programme you want to watch
(Jet Navigator Memory)

This allows you to search the cassette which you recorded the
programme you want to watch without inserting video
cassette tapes.

Preparations
• Display the VCR picture on the TV.
• You can only search for cassettes recorded in timer

recording with setting [JET NAVIGATOR] to [ON]
(See page 8) on this VCR in the past.

1 Press [MENU]

(9) to display the Main menu on the TV

screen.

2 Press [

43] (28) to select [NAVI MEMORY 1

*

PROG.]

then press [ENTER]

(26).

• NAVI MEMORY Screen appears.
• The programme list for 1 cassette

is displayed per 1 screen.

• Up to 20 cassettes can be

selected on this VCR and
displayed on the NAVI MEMORY
Screen.

* The number of Jet Navigator Data memorized on this

VCR is displayed.

3 Press [

2 1] (28).

• The display can be switched for each cassette

(programme list).

To Cancel the NAVI MEMORY Screen:
Press [MENU]

(9).

To Demonstrate the Jet Navigator Function

Keep [NAVI]

(25) pressed for more

than 5 seconds without inserting a
cassette tape.

To Cancel the Demonstration of Jet Navigator Function:

Press [MENU]

(9).

To Check the Recorded Programming Data
(Time Stamp Function)

When playback starts after searching
with Jet Navigator function or index
search function, recorded programming
data (called Time Stamp) appears on
the TV screen for approx. 5 seconds.

Note:
• Time Stamp does not appear if the beginning of the Jet

Navigator data is not recorded 10 minutes before and after
the current tape position even when index signals are
recorded.

To Find the Beginning of Each Recording
(VHS Index Search System)

This VCR automatically records special index signals on the
tape every time a recording is started. The Index search
function makes use of these index signals to let you find the
beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following
cases:
• When you start a recording by pressing [REC]

(15) or [REC/

OTR]

(37).

• When a timer recording starts.
• When you press [REC]

(15) on the remote control during

recording.

Conditions for correct operation of the Index search
function:
• The VCR must be in the stop mode or in the playback mode.
• Each programme recorded on the tape must be at least

5 minutes long.

Preparations
• Display the VCR picture on the TV.
• Insert a recorded video cassette.

Operation
1 Press [INDEX]

(13) (that corresponds to the direction

from the current tape position in which the desired
programme is located on the tape) to start the index
search.
For example, if you want to search for the 2nd
recorded programme in forward direction, press
[INDEX]

(13) (

L) twice.

• The VCR fast-forwards or rewinds the tape and searches

for the specified index signal (the beginning of the desired
recorded programme).
When it is found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:
Press [STOP]

(12).

Notes:
• Searching in either direction is possible up to the 20th index

signal.

• If you press either of [INDEX]

(13) too many times, simply

press the other [INDEX]

(13) (indicating the opposite

direction) to correct it. In this way, you can reduce the
displayed figure down to 1.

• The figure on the VCR display decreases by 1 every time an

index signal is located.

Finding a Timer-recorded programme for
viewing (Easy Programme Playback)

Allows you to find a timer-recorded programme with
One-touch operation and to play it back easily.

Preparation
Set timer recording for the programme you wish to view.

Operation
1 Press [PROG PLAY]

(21).

• As soon as the timer-recorded

programme is found, playback
starts automatically.

To Cancel the Easy Programme Playback:
Press [STOP]

(12).

Notes:
• The VCR memorises the position at which timer recording is

set to the standby mode by pressing [TIMER (REC)]

(14) as

the start point of Easy Programme Playback.

• If you take out the cassette after a timer recording has

finished, Easy Programme Playback function does not work.

END : MENU

SELECT :

NO.01 NAVI MEMORY

DATE

CH ON

CATEGORY

10/18

1 10:30

MUSIC

DEMONSTRATION

END : MENU

SELECT : NAVI

NO.01

JET NAVIGATOR

DATE

CH ON

CATEGORY

1/10

2

8:00

MUSIC

1/10

6 19:00

SPORT

1/10

4 21:00

MOVIE

1/10

6 22:00

CHILD

CH 2 10/29. SA

ON 20:02

2222

PROG PLAY

LSQT0879.book 15 ページ 2005年2月8日 火曜日 午後5時28分

Advertising