Panasonic NV-MV22GN - Manual (Page 5)

5
LSQT0879
Storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels
(Australia only)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9, 10 and UHF channel 28, these are already
tuned on the programme positions with the matching numbers.
However, it is possible to cancel these settings and tune the
local TV broadcast channels to any desired programme position.
Auto Tuning Using the On Screen Display
For New Zealand
When you use this VCR in New Zealand, need to operate as
follows.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
AV.
Operations
1 Press [MENU]
(9) to display the
Main menu on the TV screen.
2 Press [ 43] (28) to select
[TUNER PRESET] then press
[ENTER]
(26).
3 Press [ 43] (28) to select
[COUNTRY] then press [ 2 1]
(28) to select [NEW ZEALAND].
4 Press [ 43] (28) to select
[AUTO TUNE] then press [ 2 1]
(28) to start the Auto Tuning.
• When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
Channels that can be received
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes 5 or more minutes to complete its search.
Auto Tuning Using the On Screen Display
For Australia
Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
AV.
Operations
1 Press [MENU]
(9) to display the
Main menu on the TV screen.
2 Press [ 43] (28) to select
[TUNER PRESET] then press
[ENTER]
(26).
3 Confirm that [COUNTRY] is set
to [AUSTRALIA].
4 Press [ 43] (28) to select
[AUTO TUNE] then press [ 2 1]
(28) to start the Auto Tuning.
• When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
Channels that can be received
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes 5 or more minutes to complete its search.
VHF UHF CATV
New Zealand 1-11 21-69 44-470 MHz
CH 1 SEARCH
END : MENU
100
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1
CLEAR
COUNTRY [NEW ZEALAND]
AUTO TUNE
SEARCH
FINE
END : MENU SELECT:
TUNER PRESET
[ OFF]
[ 3]
CH 1
CLEAR
COUNTRY [NEW ZEALAND]
AUTO TUNE
SEARCH
FINE
END : MENU SELECT:
TUNER PRESET
[ OFF]
[ 3]
MENU
SELECT
END : , ENTER
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0PROG.
MENU
SELECT
END : , ENTER
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0PROG.
The number displayed here
is the number of channels
still to be auto tuned.
VHF UHF CATV
Australia 0-12 28-69 45-470 MHz
CH 1 SEARCH
END : MENU
100
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1
CLEAR
COUNTRY [AUSTRALIA]
AUTO TUNE
SEARCH
FINE
END : MENU SELECT:
TUNER PRESET
[ OFF]
[ 3]
CH 1
CLEAR
COUNTRY [AUSTRALIA]
AUTO TUNE
SEARCH
FINE
END : MENU SELECT:
TUNER PRESET
[ OFF]
[ 3]
MENU
SELECT
END : , ENTER
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0PROG.
MENU
SELECT
END : , ENTER
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0PROG.
The number displayed here
is the number of channels
still to be auto tuned.
LSQT0879.book 5 ページ ２００５年１月２６日 水曜日 午後６時１７分