Netcom NB9 - Manual (Page 26)

 NB9/NB9W ADSL+ VoIP Router
YML790 Rev8
Field Means
Enable Phone 1 call
waiting. To enable Call waiting feature on Phone 1.
Enable Phone 2 call
waiting. To enable Call waiting feature on Phone 2.
Call forward Type:. To enable call forward on phone1 and 2. Calls to the account will be forwarded to the
nominated phone number in “Call Forward Phone Number” field.
Signaling and Media QoS. Leave as default unless instructed by your VoIP Service Provider.
Once you have input these settings, click Apply and Save VoIP Parameters which will save your settings and
attempt to register the NB9/NB9W with your VSP.
Click on Basic>Home to check the status of your VoIP service. In the Basic-Status window, you will see the
following status indicators:
VoIP Status Indicator Means
Direct Mode VoIP is available but you are not connected to a SIP service. You are only able to make VoIP
calls by entering IP details of remote device.
SIP Registration Fail Usually indicates Invalid VoIP/SIP User ID and Password (= VoIP phone number and
Authorisation Code). Check VoIP entries and try again.
SIP Registration Success Connected to VSP; ready for VoIP phone calls. In this case you will hear a normal dial-tone.