Netcom NB9 - Manual (Page 41)

NB9/NB9W ADSL+ VoIP Router 1
YML790 Rev8
Management > Device Settings > Update Firmware
The ‘Update Firmware’ screen allows you to obtain an updated firmware image file from NetComm. Manual
software upgrades from a locally stored file can be uploaded using this screen by selecting a firmware file
saved to your hard-disk and clicking the ‘Update Firmware’ button.
Notes: Please make sure that any firewall or anti virus program is turn off before updating the firmware.
Management > SNMP
The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network
by retrieving settings on remote network devices. To do this, the administrator typically runs an SNMP
management station program such as MIB browser on a local host to obtain information from the SNMP
agent, in this case the NB9/NB9W (if SNMP enabled). An SNMP ‘community’ performs the function of
authenticating SNMP traffic. A ‘community name’ acts as a password that is typically shared among SNMP
agents and managers.
To enable SNMP, change the setting for “SNMP Agent” to “Enable”.
Field Means
Read Community Read device settings.
Set Community Read and change device settings.
System Name Default = NB9/NB9W.
System Location User-defined value.
System Contact User-defined value.
Trap Manager IP IP Address of admin machine.