Netcom NB9 - Manual (Page 31)

NB9/NB9W ADSL+ VoIP Router 1
YML790 Rev8
Quick Security Setup 2 – WPA-PSK
If a stronger network security settings is required, go to Wireless>Security and select WPA-PSK from the
Network Authentication drop-down menu. Enter a network key of your choice in the WPA Pre-Shared Key
field; this can be from 8 to 63 characters and contain special characters and spaced. And change the
WPA Group Rekey Interval to 3600.
Select TKIP for WPA Encryption and leave WEP Encryption as disabled.
Users wishing to connect to your network will need to know the SSID name and the WPA Pre-Shared Key.
Note: Wireless client network cards must be WPA-compliant to connect to your network; if in doubt check the wireless client network
card documentation, or use WEP security (above).