NETGEAR WPN311 - Manual (Page 36)

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
4 -6 C on figu ra tion
Figure 4-3: Settings tab page
b. Click the Settings tab to display the view shown above.
c. Select Ad-Hoc in the Network Type section.
d. Enter the SSID for the Ad-Hoc network.
e. Click Apply.
2. Save your settings in a Profile.
a. Type a descriptive name for the Profile Name.
b. Click Save Profile. All the configuration settings are saved in this profile.
c. Click Apply.
d. Click Close to exit the configuration utility.
3. Configure the PC network settings.
a. Configure each PC with either a static IP address or with the IPX protocol.
Note: For instructions on configuring static IP addresses or the IPX protocol, refer to the
networking tutorial on your NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Resource CD.
b. Restart the PCs.