NETGEAR WPN311 User Manual
Page 70
User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
C -2
P re p a rin g Y ou r P C s for N e twork A cce ss
1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
The Network window opens, which displays a list of installed components:
You must have an Ethernet adapter or an WPN311, the TCP/IP protocol, and the Client for
Microsoft Networks.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.
If you need to add TCP/IP:
a.
Click the Add button.
b. Select Protocol, and then click Add.
c.
Select Microsoft.
d. Select TCP/IP, and then click OK.
If you need to add the Client for Microsoft Networks:
a.
Click the Add button.
b. Select Client, and then click Add.
c.
Select Microsoft.