Verifying tcp/ip properties for windows xp or 2000 – NETGEAR WPN311 User Manual
Page 79
Advertising
User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
P re p a rin g Y ou r P C s for N e twork A cce ss
C -1 1
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC’s TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type
cmd
and then click OK.
A command window opens
3. Type
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0
•
The default gateway is 192.168.0.1
4. Type
exit
Advertising