NEC LT280 - Manual (Page 18)

16
5. Setting the LAN Setting of Projector
■ Setting Wireless LAN
1 Display the “PC Card” page of “LAN Mode”.
Configure the setting of wireless LAN in the "PC Card” page of “LAN Mode” selected from On-Screen Menu.
<1> In the “LAN Mode” setting window, if the “Built-in” tab is highlighted, press the
button
to highlight “PC Card”.
The “PC Card” page will be displayed.
• If “LAN Mode” is not displayed, refer to “5-1. Displaying On-Screen Menu (LAN Mode)” ( page 13).
2 Select “Profiles”.
<1> Press the SELECT
̄
button once to highlight the “Profiles” field and press the button.
<2> Use the SELECT
̄
/
̆
button to highlight “Profile 1”, and press the button.
•
“Profile 1” or “Profile 2” can be stored in the memory of the projector as the setting for LAN.
•
“Easy Connection” is a mode in which the personal computer that runs Image Express Utility 2.0 in
the User Supportware 3 CD-ROM is easily connected to wireless LAN.
Note that “Easy Connection” does not support software other than Image Express Utility 2.0.
•
When “Easy Connection” is selected, the IP address and subnet mask do not have to be set. To
use “Easy Connection”, the OS of the personal computer must be Windows XP ([Computer
Administrator] privilege). It cannot be used with Windows 2000.
The communication mode is “802.11 Ad Hoc”.