NEC GT2150 - Manual (Page 49)

E – 39
Normal / Eco Advanced Menu
Source Select
Adjust (Source)
Volume
Ref Adj
Factory Default
Projector Options
Help
Test Pattern
All Data / Current Signal
Including Entry List
Keystone
Lamp Mode
Ref. White Bal.
Contents
Source Information
Projector Information
Brightness R/G/B, Contrast R/G/B
Standalone / Master / Slave
Standalone / SW 1 Level / SW 2 Level
Network Board / Default Gateway
Contents
Cross Hatch, Gray Bars
Black Raster, Gray Raster (25%)
Gray Raster (50%), White Raster
Red / Green / Blue
Page 1
Page 2
Page 3
Source Name / Input Terminal / Entry No. / Horizontal Frequency /
Vertical Frequency / Sync Polarity
Signal Type / Video Type / Sync Type / Interlace / Resolution / Direct Key
Aspect Ratio (I) / Aspect Ratio (D) / Gamma Correction / Noise Reduction (L) /
Noise Reduction (C) / Color Matrix / Matrix Type
Page 1
Page 2
Page 3
Menu Mode (Basic/Custom Menu, Advanced Menu, Service Menu)
Basic/Custom Menu Edit
Language (English / German / French / Italian / Spanish / Swedish / Japanese)
Menu Display Time (Manual / Auto 5 sec / Auto 10 sec / Auto 30 sec)
Display Select (Date, Time, Input Terminal, Source Name, Projector ID On/Off)
Date Format (MM/DD/YYYY, MM/DD/YYYY ddd, DD/MM/YYYY, DD/MM/YYYY ddd,
YYYY/MM/DD, YYYY/MM/DD ddd, Month DD,YYYY, Month DD,YYYY ddd)
Data, Time Preset
Message (No Input, Clean Filter On/Off)
Direct Button (Volume Bar, Keystone Bar On / Off)
On / Off Timer
Sleep Timer
Timer
Menu
Setup
Link Mode
Switcher Control
LAN Mode
Execute Switch (Active / Inactive)
Edit
Preset Time (Off / 0:30 / 1:00 / 1:30 / 2:00)
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Orientation (Desktop Front / Ceiling Rear / Desktop Rear / Ceiling Front)
Background (Blue / Black / Logo)
S-Video Mode Select (Off / S2)
Remote Sensor (Front, Back, Left, Right On/Off)
Signal Select RGB1 (Auto / RGB / Component)
RGB2 (Auto / RGB / Component)
Sync Termination RGB1 (Hi-Z / 75 Ω )
Signal Select Video1 (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
Video2 (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
S-Video (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
RGB1(Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
RGB1(S-Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
Auto Adjust (RGB Only) Power Management Power Off Confirmation
Keystone Save Built-in Speaker Lamp Off Mode
Last Memory User Name
Communication Speed (4800 / 9600 / 19200 / 38400)
Projector ID (Enable / Disable) 1-64
Default Source Select (Last / Auto / Select)
Standalone
[RGB1/RGB2/DVI (DIGITAL)/Video1/Video2/S-Video/
RGB1(Video)/RGB1(S-Video)]
SW1 Level (Slot 1 – 10)
SW2 Level (M-01 S-01 – M-10 S-10)
Clear Lamp Hour Meter
Clear Filter Usage
Page 1
Page 2
Page 3
Page 4
User Name / Remaining Lamp Time / Lamp Hour Meter / Filter Usage /
Projector Usage / Projector ID
Version (BIOS / Firmware / Data / SUB-CPU)
FPGA Version (OSD / JOE)
Link Mode (Master / Slave)