NEC 5330 IP - Manual (Page 23)

5330/5340 IP Phones – User Guide
23
Specify Audio Feedback Options
The error beep volume in the phone is related to the volume of the speaker. You can set the beep
volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1. Press Settings.
2. Press Audio Feedback.
3. Set the options using the appropriate actions described below:
Option Action
Turn audio feedback off for errors Press Turn Off.
Adjust audio for error beeps Press Volume + or Volume –
Turn audio feedback on for errors Press Play Error Tone
4. Click Save.
Note: Press Cancel at any time to exit this application without making any changes.
Specify Text Size
To specify the text size that displays on the phone:
1. Press Settings.
2. Press Text Size.
3. Select Large Text or Small Text.
4. Press Save.
Note: This setting is available only on the 5340 since the 5330 always uses large text. Large is
the default text size on the 5340 IP Phone.