NEC 5330 IP - Manual (Page 92)

5330/5340 IP Phones – User Guide
92
USING THE CORDLESS DEVICES APPLICATION
The Cordless Devices Application provides access to module information and pairing for hand-
or headsets.
To access the Cordless Devices Application, do one of the following:
•
Press the blue Applications key and then press Cordless Devices
•
Press a feature key you have programmed as the Cordless Devices Application key.
For information about programming feature keys, see page 29.
Note: When the pairing button on the Cordless Module is pressed, or when the battery level of a
cordless accessory is critically low, the phone will automatically open the Cordless Devices
Application.
Viewing Cordless Module Information
You can use the Cordless Module Application to view protocol, firmware, and hardware
information about the module.
To view cordless module information
1. Access the Cordless Module Application.
2. Press Cordless Module Info. Device information appears on the screen.
3. Press Close to exit.
Low Battery Level
When the battery of a cordless device reaches a near-critical level, the phone displays a warning.
Until the battery is recharged (or until it becomes fully discharged), the warning is repeated at
each new call made using the Prime Line. To continue with a call while charging the cordless
accessory, switch to speakerphone and then cradle the cordless accessory.