Navman FUEL 2100 - Manual (Page 7)

7 FUEL 2100 Installation and Operation Manual NAVMAN
Mounting
The instrument panel must be 3mm to 19mm
(
1 /
8
" to 3 /
4
") in thickness.
• Drill a 51mm (2") hole in the instrument panel.
• Remove brackets and insert the instrument so
the back is flush with the instrument panel.
• Slide the bracket over the instrument and
tighten the mounting nut until secure.
Instrument
Panel
Mounting
Bracket
Mounting Nut
Instrument
51mm (2”)
Hole
Sealing
Gasket
WARNING
IT IS VERY IMPORTANT TO INSTALL A FUEL FILTER BETWEEN THE FUEL FLOW TRANSDUCER
AND THE FUEL TANK. THIS FILTER WILL CATCH LARGER PARTICLES OF DIRT FROM THE
FUEL TANK AND PREVENT THE FINE GAUZE FILTER IN THE FUEL FLOW TRANSDUCER FROM
BECOMING BLOCKED AS THIS MAY DAMAGE THE ENGINE.
Location
The FUEL 2100 is designed for above or below deck
installation. Select a position that is:
• On a flat surface
• At least 300mm (12") from a compass
• At least 500mm (20") from any radio
• Easy to read by the helmsman and crew
• Protected from physical damage
• Accessible to electrical cable connections
3 Installation