NEC Digital Telephone Xen IPK - Manual (Page 17)

DISA Password
Setting Your DISA Password
Lift handset
Dial DISA Password set access code
Dial your DISA ID code__________
Dial your current DISA password__________ default 0000000000 (10 zeros)
Dial your new DISA password__________
Replace handset
Note 1: Password may be a maximum of 10 digits. If the new password is less than
10 digits, replace the handset to enter.
Note 2: It is recommended that your DISA password be 10 digits and be changed
frequently to prevent unauthorised use.
ACD/UCD
Log On Log Off
Press Speaker Press Speaker
Dial access code____ Dial access code____
Dial 1 Dial 2
Press Speaker Press Speaker
Note: A LOG key may be assigned in system programming to log/off from the
ACD/UCD group. A lit led indicates that the station is logged-on.
Break Mode
Set Cancel
Press Speaker Press Speaker
Dial 40 Dial 42
Press Speaker Press Speaker
Note 1: Break Mode is only available while an agent is logged-on.
Note 2: A Break key may be assigned in system programming to set/cancel Break
Mode. A lit LED indicates that the station is in Break Mode.
Answering Call Using Headset
Press HEADSET key to answer
Converse
Press HEADSET key to hang up
15
NEC Xen Phone UserGuide 18/7/2003 3:56 PM Page 15