Removing the lcd panel, Page 14, Fig. 20 lcd hinge screws at the rear – NEC T5 User Manual
Page 14: Fig. 21 lcd hinge screws at the bottom
Advertising
Packard Bell EasyNote T5 Disassembly Manual
Page 14
Fig. 20 LCD hinge screws at the rear
4. Unscrew the two screws located on the bottom of the unit as shown in Fig. 21
Fig. 21 LCD hinge screws at the bottom
5. Carefully lift the LCD module out of the system and put it aside.
Removing the LCD Panel
To remove the LCD Panel, first remove the LCD Module (see
Removing the LCD Module
), then
perform the following steps:
1. Unscrew all screws shown in Fig. 22
M2x6 Black
M2x6 Black
Advertising