Ab a a b – NEC T5 User Manual
Page 17
Advertising
Packard Bell EasyNote T5 Disassembly Manual
Page 17
To remove the Top Cover, first remove the Keyboard Cover (see
Removing the keyboard cover
),
remove the keyboard (see
Removing the keyboard
), remove the LCD module (see
Removing the
LCD Module
) then perform the following steps:
1. Disconnect the MIC connector on the DC/DC board.
2. Release all screws shown in Fig. 26
Fig. 26 Removing the Top cover screws
3. Flip over the unit and remove the screws as shown in Fig. 27
Fig. 27 Removing the Top cover screws on the bottom of the system
4. Remove all screws in the battery compartment as shown in Fig. 28
A = M2x6
Black
B = M2.5x12.5
Silver
A = M2x15
Black
B = M2.5x11
Black
M2x3 Sliver
A
B
A
A
B
Advertising