Page 9, Carefully remove the heat plate from the base unit – NEC T5 User Manual
Page 9
Advertising
Packard Bell EasyNote T5 Disassembly Manual
Page 9
Fig. 10 Removing the screws on Heat Plate
Note: If you want to disassemble the Optical Drive, you are required to release Screw “A” only.
2. Push the Optical Drive module out from the base unit as shown in Fig. 11
Fig. 11 Pushing Optical Drive module out from base unit
3. Carefully remove the heat plate from the base unit.
M2.3 x 6 Sliver
A
Advertising