Removing the optical drive & heat plate, Page 8 1. remove the screws as shown in fig. 8, Fig. 9 removing the keyboard fpc cable – NEC T5 User Manual
Page 8
Advertising
Packard Bell EasyNote T5 Disassembly Manual
Page 8
1. Remove the screws as shown in Fig. 8
Fig. 8 Removing the screws holding the keyboard
Note: The screw “A” located on the hard disk slot cover holds the hard disk drive and the keyboard.
2. Carefully lift up the keyboard.
3. Release the keyboard FPC cable as shown in Fig. 9 and put the keyboard aside
Fig. 9 Removing the keyboard FPC cable
Removing the Optical drive & Heat plate
To remove the optical drive & heat plate, first remove the keyboard cover (see
Removing the
keyboard cover
), remove the keyboard (see
Removing the keyboard
) then perform the following
steps:
1. Remove the screw as shown in Fig. 10
M2.5x11 Black
A
Advertising