Navini Networks Ripwave - Manual (Page 14)

Navini Networks, Inc. Ripwave MX Modem User Guide
The LCD, continued
LCD Indicators:
1 The Modem is syncing with a BTS. SEARCHING: Blinking flash:
2 Modem has locked-on to a BTS. CONNECTED: The
3
c activity
Activity Indicator:
Both arrows flashing:
There is traffic activity.
Blank: There is no traffi
4 ator (SSI) S: Signal Strength Indic
S < 100 dBm 0 bars
1 bar -99 < S ≤ -100 dBm
S ≤ -99 dBm 2 bars -96 <
< S ≤ -95 dBm 3 bars -92
≤ -91 dBm 4 bars -88 < S
< S ≤ -87 dBm 5 bars -84
6 bars -80 < S ≤ -83 dBm
6 < S ≤ -79 dBm 7 bars -7
-70 < S ≤ -75 dBm 8 bars
5 Q: Signal-to-Noise Ratio (SNR)
0 bars Q < 10 dB
1 bar 10 < Q ≤ -12 dB
2 bars 13 < Q ≤ -14 dB
3 bars 15 < Q ≤ -16 dB
4 bars 17 < Q ≤ -18 dB
5 bars 19 < Q ≤ -20 dB
6 bars 21 < Q ≤ -22 dB
7 bars 23 < Q ≤ -24 dB
8 bars Q ≥ 24 dB
14
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)