Navini Networks Ripwave - Manual (Page 33)

Navini Networks, Inc. Ripwave MX Modem User Guide
33 33
1: -MX Modem - PC Troubleshooting
- For Use With All a d ostics Software -
C Operating Systems
rior to installing the Navini Diagno k to insure that the PC Operating System
eets the criteria given in the table below. If these criteria are not met, unpredictable problems may
ccur as a result of installation. It is recommended that the user have the latest Windows c updates
stalled prior to installing the Navini Diagnostics software.
ADDENDUM Ripwave ™
Ripw ve-MX LMX Modems an
stics software, please chec
Navini Diagn
P
P
m
o
in
Operating System Ethernet interface Notes
Win95 Supported 1, 2
Win98 Supported 2
Win98, 2nd ed. Supported 2
WinME Supported 2
Win 2000 Supported 2
Win NT 3.0/4.0 Supported 1, 2
Win XP Supported 3
Note 1: Internet Explorer 3.0 or higher is required
ote 2: Requires Service Pack 1
ote 3: To load the Navini Diagnostics software, the user MUST have Administrative privileges.
thernet Interface
he Ethernet Modem may be connec rnet connection. Also, it is possible to
onnect multiple PC devices to a sin C configuration is transparent to the PC
sers and is analogous to a m PC mal Ethernet LAN. Check with your Service
rovider if multiple IP addressing is required for your pa
e Ethernet Modem is that it connects to any device that has an Ethernet interface. This makes it ideal
r small businesses that have a mix of devices, such as Unix machines, Apple Computers , etc. IP
ddresses can be assigned to the dev CP server, or as Fixed IP assignments, or
oint-to-Point Protocol Over Etherne
ultiple Interface Environments
hen a PC has an internal interface (for example, a Wireless Ethernet interface) in addition to the LMX
odem, you should do the following:
If the wireless connection is not required, disable the internal wireless connection
If the built-in wireless connection is required for local networking and wireline Ethernet is used via
the LMX Modem for Internet connection, change the interface metric configuration so that the
wireline interface’s default gateway is used. (See your Operating System’s User Guide.)
N
N
E
T ted to a PC via an Ethe
gle Modem. The multi-P c
u
ulti- configuration on a nor
rticular configuration. The distinct advantage of P
th
fo
a
ices dynamically via a DH
t (PPPoE). P
M
W
M
•
•
33
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)