Navini Networks Ripwave - Manual (Page 28)

Navini Networks, Inc. Ripwave MX Modem User Guide
Connecting an
Disconn d
ecting the
D-EBP H
If you have a HD-EBP, the battery pack is installed in the bottom
of the Modem. To install and or remove the battery pack, follow
the steps below.
Step Action
Illustration
1. Depress the front button
on the battery so that the
front prong moves in
towards the center of the
battery.
2. Place the back slot of
the Modem over the
back prong of the
battery.
3. Place the front part of
the opening on the
Modem over the front
prong on the battery.
4. Release the button on
the battery.
5. Press firmly down on
the Modem so that the
Modem firmly connects
with the battery.
Front
button
Front prong Back prong
Front slot Back slot Front slot Back slot Front slot Back slot
Front
button
Front prong Back prong
Front
button
Front prong Back prong
28
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)