Navini Networks Ripwave - Manual (Page 27)

Navini Networks, Inc. Ripwave MX Modem User Guide
The Indicator Light on the
S-EBP, continued
g the
-EBP
for
pens
e
ll shut
rge state. Recharging the battery will
store it to its normal healthy state.
ng the battery has no power) or is red
ndicating the battery level is low).
o recharge the S-EBP, use only the 12V charger that came with
e S-EBP. Using any other charger can damage the battery. To
harge the S-EBP, plug the 12V adapter into the 12V input socket
n the S-EBP.
Note: The battery may charge while it is connected to a
odem.
Note: Do not attempt to plug the 12V adapter into the Modem
s this can harm the Modem.
Chargin
S
Note
1
: As with any battery, when the S-EBP is left unused
a long period of time, it tends to lose its charge. When this hap
and when the charge drops to approximately 5% of the full charge
level, the red LED comes on to indicate that the battery’s charg
level is low. After a limited duration, the internal circuitry wi
down both the LED and the battery to prevent the battery from
going into a deep-discha
re
The S-EBP needs to be recharged when the battery is connected to
a Modem and the Modem is turned on but the LED on top of the
battery remains off (indicati
(i
T
th
c
o
M
a
27
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)