Network Technologies UNIMUXUSBVXHD - Manual (Page 44)

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
39
When a key is pressed, the master switch will start the process of detecting the configuration. This could take several seconds,
depending on how many switches are connected together. When configuration update is ready, the splash screen disappears and
the system is ready to operate. (If security mode is activated, the login window will be displayed on the screen). The update-
configuration function can be recalled at any time by entering into Command Mode and pressing the <F5> key.
Note: If a slave switch is power cycled, use the Refesh command (page 14) to update the configuration.
After completing the configuration detection, the splash screen is turned OFF and the switches can be operated. All configuration
can be controlled from the keyboard, mouse and monitor through OSD menus (page 12).
SUN RAY SUPPORT
The UNIMUX fully supports SUN Ray CPUs, however, a lack of horizontal mouse movement may be experienced. If this occurs,
enable MAC mode (page 22) for the port that the SUN Ray is connected to. This should enable proper mouse movement.