NEC PlasmaSync 4210W - Manual (Page 23)

16
Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1. Press the "WIDE / AUTO WIDE" button on the remote
controller.
Information
Ⅵ
Supported resolution
• When 800 dot
ן600 line signals are input, they are
converted to 640 dot
ן480 line or 853 dotן480 line
signals.
• When 1024 dot
ן768 line signals are input, they are
converted to 640 dot
ן480 line or 853 dotן480 line
signals.
• When 1280 dot
ן1024 line signals are input, they are
converted to 597 dot
ן478 line.
See page 50 for details on the display output of the
various vesa signal standards supported by the moni-
tor.
• When 852 dot
ן480 line wide VGA (*) signals with
a vertical frequency of 60 Hz and horizontal frequency
of 31.72 kHz are input, select "WIDE" for the "RGB
SELECT" setting. Since selecting an 848
ן480 sig-
nal automatically displays the image in correct size,
it is not necessary to change the RGB SELECT set-
ting.
* "IBM PC/AT" and "VGA" are registered trademarks of IBM, Inc.
of the United States.
The picture has the same size as the normal computer im-
age.
FULL size screen
The image is expanded in the horizontal direction.
When using a graphic accelerator boad that is capable of
displaying 848
ן480.
FULL size screen
2. Within 3 seconds ...
Press the "WIDE/AUTO WIDE" button again.
The screen size switches as follows:
→
NORMAL
→
FULL

NORMAL size screen (4:3)