NEC PlasmaSync 4210W - Manual (Page 30)

23
Reducing noise in the picture
Use these settings if the picture has noise due to poor re-
ception or when playing video tapes on which the picture
quality is poor.
Example: Setting “NR-3”
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “PICTURE”, then
press the “OK” button.
The “PICTURE” screen appears.
2. Use the ▲ and ▼ buttons to select “NR “.
4. Press the “OK” button.
The noise reduction mode is set to “NR-2”.
N R - 3 N R :
3. Use the ᮤ and ᮣ buttons to select “NR-3”.
The mode switches as follows when the ᮤ and ᮣ but-
tons are pressed:
→ OFF ↔ NR–1 ↔ NR–2 ↔ NR–3 ←
* If neither the ᮤ or ᮣ button is pressed within 5 sec-
onds, the current selection is set and the previous
screen reappears.
5. Once the setting is completed ...
Press the “MENU” button.
All menus disappear.
Information
Ⅵ
NR
* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.
Ⅵ
Types of noise reduction
There are three types of noise reduction. Each has a dif-
ferent level of noise reduction.
The effect becomes stronger as the number increases
(in the order NR-1
→
NR-2
→
NR-3).
OFF .......... Turns the noise reduction function off.
P I C T U R E
M E M O R Y P I C T U R E M O D E :
C O N T R A S T :
B R I G H T N E S S :
S H A R P N E S S :
C O L O R :
T I N T :
C O L O R T E M P : 2
N R : N R – 2
R E T U R N
SEL.
ADJ.
EXIT
MENU
P I C T U R E
M E M O R Y P I C T U R E M O D E :
C O N T R A S T :
B R I G H T N E S S :
S H A R P N E S S :
C O L O R :
T I N T :
C O L O R T E M P : 2
N R : N R – 3
R E T U R N
SEL.
ADJ.
EXIT
MENU