Neuro Logic Systems 17" - Manual (Page 9)

RFT2 Rack Kit Installation Guide
07/01/06 Rev 1.0 Page 9 of 13
Navigating the Menu
(The OSD Controls may be located on the back or the top of the LCD head)
Although not required, you can make numerous adjustments to your monitor using the on-screen menu. To
access the OSD (On-Screen Display) menu Press the MENU button located at the top of the LCD monitor.
The table below describes various function controls of the LCD Monitor. The control buttons can be accessed
from the top of the LCD monitor once it has been raised in to the operating position. The OSD menu will
disappear after a pre-set time of no use.
Label Control
Function when not
displaying menu
Function when displaying
menu
Menu button
Displays the On-Screen
Display (OSD)
Selects item high-lighted in
blue
Brightness/minus Decrease display brightness
Decreases or changes value
of the adjustment item or
moves down in a menu
Brightness/plus Increase display brightness
Increases or changes value of
the adjustment item or moves
up in a menu
Input Select
Switches video input
signal from DVI to/from VGA
No Function
Power switch
Turn power on and off
manually
Turn power on and off
manually