Eizo eClient LCD Monitor Integrated Windows-based terminal 630L - Manual (Page 105)

English
7. PRACTICAL SETUP
105 105
630L Settings
The 630L’s default setting is set to enable DHCP Options. There is no need for extra
settings. After initial setup, confirm the following:
• [Use PPP connection or another network adapter] in the [Network] tab of “Terminal
Properties” is selected.
• Press “DHCP Option” on “Network” tab in the “Terminal Properties”. “DHCP
Options” is displayed.
[Enable DHCP Option] is selected, and code numbers assigned for the DHCP
options.
After completing the above, the 630L will automatically receive information such as an
IP address from the DHCP Server every time the unit is turned on.
NOTE
• If the DHCP Option is used to setup the 630L for the first time, “Terminal Connection
Manager” will appear because the unit automatically receives information from the
DHCP Server. (“WBT Setup Wizard will not be displayed.)
• If the DHCP Option is set once and needs to be canceled, please change the key of
the DHCP Server. Even if changing the DHCP Option in the 630L, the DHCP
Server will overwrite the option next time the unit is restarted, and the changes in
the 630L will not be effective.