Eizo eClient LCD Monitor Integrated Windows-based terminal 630L - Manual (Page 11)

English
2. CONNECTING THE 630L
11 11
2-2. Connecting the 630L
NOTE
• Before connecting the 630L, confirm the following:
• The 630L is turned off.
• The WTS is turned on.
• Connect the peripherals to the appropriate connectors of the unit.
1.
In case of connecting the WTS through LAN:
Connect the 630L to the network with an ethernet cable.
In case of a dial-up or dial-in connection:
Connect the 630L to a modem or a modem card.
NOTE
• If using a LAN card for the connection, Please Insert a LAN card after finishing
the WBT Setup Wizard (see page 29).
• Please remove the lid on the side of the 630L before connecting a modem
card.
2.
Plug a keyboard and a mouse into the 630L. If using other devices,
please connect them to the appropriate connectors.
Modem
Card
Keyboard
Mouse
Printer/
Modem
Power
Cord
Network
Headphones