Eizo eClient LCD Monitor Integrated Windows-based terminal 630L - Manual (Page 40)

English
40
3. SETTING UP THE 630L
40
[Device Configure...]
...................................Click the button the detailed settings of the modem.
(Please refer to the instruction manual of a modem for
settings of the modem.)
[Port Settings] tab
[Manual Dial (user supplies dial strings)]
...................................Click this box to set up for manual dialing.
[Terminals]
[Use terminal window before / after Dialing]
...................................Click this box to record terminal window information
before or after dialing.
[Connection Preferences]
[Baud Rate] ........................Set data transmission rate from 110 to 115,200 bps.
[Data Bits] ..........................Set data bits.
[Parity] ...............................Set enabling to check the data's transmission.
[Stop Bits]...........................Set length of the Stop Bits.
[Flow Control]....................Set Flow Control.
[Call Option] tab
[Cancel the call if not connected within]
...................................Click the box and set the intervals to the right box
before canceling the connection in case of connection
failure.
[Wait for dial tone before dialing]
...................................Click to dial after dial tone.
[Wait for credit card tone]
...................................Click the box and set the intervals before canceling the
connection in use of a credit card for dialing.
[Extra Settings (Special modem commands may be inserted into the dial strings)]
...................................Enter a special modem command if required.
Click [OK] on [Device Properties] when finished. “Terminal Properties” will be
displayed.