Eizo eClient LCD Monitor Integrated Windows-based terminal 630L - Manual (Page 15)

English
3. SETTING UP THE 630L
15 15
7.
IP address setting page is displayed.
[Yes, use the IP information supplied by DHCP.]
...................................Select this when using DHCP service. All the
necessary information of the 630L including the IP
address will be obtained by the DHCP.
[No, I will enter static IP information.]
...................................Select this when not using DHCP service. Enter the IP
address of the 630L.
If DHCP service is not in operation, following message
appears.
Type a [Terminal Name] for connection to a WTS by the RDP (Microsoft Remote
Desktop Client) protocol.
[Terminal Name] ................Type the name to identify this unit on the network.
Click [Next>].
Refer to step 6 if you select [Yes, use the IP information supplied by DHCP.]
Refer to step 5 if you select [No, I will enter static IP information.]