NEC MultiSync LT 80 - Manual (Page 29)

Provides access to controls for your image and sound. Use the “Select” button on the pro-
jector cabinet or (▲) (▼) buttons on your remote control to highlight the menu for the item
you want to adjust.
The volume, brightness, contrast, color, tint, sharpness and Image Mode controls are avail-
able for Video or S-Video sources.
The volume, brightness, contrast, horizontal position, vertical position and auto picture
controls are available for RGB source.
Volume
Use the “Adjust” (+) or (–) buttons to adjust the volume.
Brightness
Use the “Adjust” (+) or (–) buttons to adjust the brightness.
Contrast
Use the “Adjust” (+) or (–) buttons to adjust the contrast.
Image Adjustment
Menu
55
Color*
Use the “Adjust” (+) or (–) buttons to adjust the color.
Tint*
Use the “Adjust” (+) or (–) buttons to adjust the tint.
Sharpness*
Use the “Adjust” (+) or (–) buttons to adjust the sharpness.
Image Mode*
Use the “Adjust” (+) or (–) buttons to choose “Normal” for a regular picture “Natural” for
true color reproduction, or “Document Camera” for a document camera or other low APL
picture.
NOTE:
1) Flicker may appear on a freeze-frame picture with a Video or S-Video source. If this
happens, select the Document Camera mode using the Image mode icon on the Image
Adjustment Menu, and then adjust the contrast and other items for an optimal image.
2) A frame may freeze for a brief period of time when a video is played back in fast-forward or
fast-rewind with a Video or S-Video source. If this happens, select the Natural mode (for
cinema) using the Image Mode icon on the Image Adjustment Menu.
OPERATION 56