NEC NEAX2000 ND-91649 - Manual (Page 40)

CHAPTER 3 ND-91649(E)
Page 32
TERMINALS
IP Base Station (IP-BS)
PHS Base Station is installed on the IP network and LAN, and Wireless Communication System can be built.
Management such as wiring can be reduced by IP-ization.
Specification of IP Base Station
Table 3-5 IP Base Station (IP-BS) Specifications
Item Specifications
Wire Interface 10M/100M RJ45 Connecter 1port
Wireless Interface RCR STD-28 3rd edition
Number of Simultaneous calls 3CH
Operating environment
Power consumption
0-40 degree, 7W
Voice codec G.711, G.729a, G.723.1
Dimensions 160 Ч 159 Ч 40mm (w/o an antenna)
Power Supply Local power supply:AC-R UNIT
Central power supply:
Correspond to electric supply HUB
SN8051 POESWEA-A(NEC)
Catalyst 3550-24 PWR (Cisco)
Catalyst Inline Power Patch Panel (Cisco)
* This IP-BS can download new soft program from MAT, so it can easily maintenance and operation.