NEC NEAX2000 ND-91649 - Manual (Page 46)

CHAPTER 3 ND-91649(E)
Page 38
TERMINALS
Subpanels and Functions
Function Key Panel
Displays lines and functions set for PBX and enables changing of button name
and pop-up.
Short Message Log Panel
Displays transmission, reception and error logs of simple messages and lets user
select a log to telephone or reply to a sender.
Call Forward Settings Panel
For setting or cancelling Call Forwarding-All Calls/Busy Line/ Don’t Answer/
Log Out for PBX.
Call Log Panel
A user can see origination and termination types, times, telephone numbers,
conversation times, and speech memos; then save them in CSV-format file.
Select a log for origination/termination, speech memo input, or deletion.
Configuration Panel
For setting origination rules, termination actions, voices, video conference
actions, simple message actions, the number of logs, user names, automatic log
in, and other convenient functions.
Video Conference Panel
Using cameras in conjunction with this panel, you can see video of calling party
in the upper panel and yourself in the lower panel.
Application Sharing Panel
For application sharing and white board functions.
10-Key Keypad Panel
Can be used like the dial pad of a telephone
.
Video Conference Panel
Requirements
Operating Environment
PC IBM/PC-AT compatible machine
OS WindowsXP/2000
Memory
256MB or more
PCU Pentium 800MHz or more
HDD 10MB or more in unused memory
Audio device USB handset (optional)
NEAX 2400 IPX (FP8700-R14 or later)
PBX-compatible
NEAX 2000 IPS (FP3300-R8 or later)
IP Relation
LAN interface 10M/100M Ethernet
Voice RTP
Transport protocol
Signal UDP/TCP
Setting of IP address DHCP setting/Direct setting
QoS TOC, IP Precedence, Diffserve
Payload cycle 20ms/30ms/40ms
Voice encoding G.711 (64k)