Nortech Systems Adept RS-232/TERM - Manual (Page 23)

Adept SmartController User’s Guide, Rev. E 23
SmartController Installation
2
2.1 Controller Installation
This equipment must be shipped and stored in a temperature-controlled environment. See
Table 2-1 . It should be shipped and stored in the Adept-supplied packaging, which is
designed to prevent damage from normal shock and vibration. You should protect the
package from shock and vibration.
Before Unpacking
Carefully inspect all shipping crates for evidence of damage during transit. Pay special
attention to tilt and shock indication labels on the exteriors of the containers. If any
damage is indicated, request that the carrier’s agent be present at the time the container is
unpacked.
Upon Unpacking
Compare the actual items received (not just the packing slip) with your equipment
purchase order, and verify that all items are present and that the shipment is correct.
Inspect each item for external damage as it is removed from its container. Contact Adept
immediately if any damage is evident.
See “How Can I Get Help?” on page 16.
Retain all containers and packaging materials. These items may be needed in the future to
settle a damage claim or to transport the equipment to a new location.
Table 2-1. Environmental Specifications
Ambient temperature 5°C to 40°C
Storage and shipment temperature –25°C to +55°C
Humidity range 5 to 90%, nonconducting
Altitude up to 2000 m (6500 feet)
Free space around controller (for proper
cooling) 10 mm at back, 13 mm on sides
Chassis protection class IP20 (NEMA Type 1)
Recommendations for customer-supplied
enclosure for Adept controller.
(Mandatory for installations in EU or EEA
countries.) Enclosure must meet EN 60204 (IEC 204)
requirements and be rated at IP54.