NEC RIH-6867 - Manual (Page 11)

Indoor temperature
Indoor temperature
SMART button is ineffective in SUPER mode.
Target temperature
Target temperature
21℃ or below
26℃ or below
22℃ 22℃
26℃
26℃
Over 26℃
Over 26℃
21℃ ℃ -26
High
High
High
High
Low
Low
Low
Low
Your feeling
A decrease or increase up to 2 can be set in SMART mode ℃
button adjustment procedure
Operation mode
Operation mode
HEATING
DRY
DRY
Room temperature
decrease 1.5℃ after
operate for 3 minutes
Room temperature
decrease 1.5℃ after
operate for 3 minutes
COOLING
COOLING
Press the button, the unit enters smart mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
SMART
A rise up to
2
can be set ℃
A decrease up
to 2
can be set ℃
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Press once to lower the
set temp by 1
Press twice to lower the
set temp by 2
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
For horizontal airflow direction, please
refer to the previous page for details.
Press once to raise the
set temp by 1
Press twice to raise the
set temp by 2
. ℃
Slightly warmer
Slightly cooler
Operation mode and temperature are determined by indoor temperature
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, a decrease or rise of up to 2
can be set with the remote controller if you still
feel uncomfortable.
℃
℃
℃
℃
Operation instructions
9
SM A RT
SLEEP
SU P ER
SMART mode
Heat pump models
Cooling only models
PDF created with pdfFactory Pro trial version www.pdffactory.com