NEC RIH-6867 - Manual (Page 12)

Timer-setting
Example: set an operation after 9.5 hours
Timer mode
It is convenient to set the timer on with button when you go out in the morning
to achieve a comfortable room temperature at the time you get home. You can also set
timer off at night to enjoy a good sleep.
TIMER
Setting a switch-on
timer when the
appliance is off. Setting a switch-off timer
during operation.
Press the button, "h" flashes on the LCD, then you can set the time.
Each time the or button is pressed,
If the desired time is within 10 hours, the set time increases or decreases by 0.5 hour;
If desired time is beyond 10 hours, increases or decreases by 1 hour.
The range can be set is 0.5 hour to 24 hours.
TIMER
Set desired operating mode, temperature setting and indoor fan speed firstly,
then press the
button and "h" flashes on LCD. TIMER
Point the remote control at the signal receptor of the indoor unit,
press the
or button when "h" flashes. Choose the timer you want ,
then press the button. TIMER
A "beep" can be heard.
Timer indicator on the indoor unit lights up.
"h" stops flashing.
To cancel the set timer: press the button again, a "beep" can be heard
and the timer indicator on the indoor unit
TIMER
off. swithes
1
3
2
10
Operation instructions
S M A R T
SLEEP
S U PE R
1
2
2
As time goes by, LCD on remote controller only displays the remained time instead of
set temperature.
The previous set time is stored and the next set time begins with the previous setting.
On- timer and off-timer can not be set at the same time.
The room may not reach your desired temperature within the preset time because of
different size of room.
PDF created with pdfFactory Pro trial version www.pdffactory.com