Network Technologies 900GV - Manual (Page 29)

Installing the DIGITAL VNswitch 900GV 2-9
How to Install the Module
Task 5: Connect the GBIC Connector
The DIGITAL VNswitch 900GV uses a Gigabit Interface Converter (GBIC)
connector.
To connect the GBIC connector (Figure 2-6), complete the following steps:
Figure 2-6: GBIC Connection
Step Action
1 Select the appropriate GBIC as listed in the section titled Task 6:
Connect the Duplex SC Cables.
2 Align the release tab on the cable plug (1), with the keyway on the
module’s GBIC port connector.
3 Insert the plug into the connector, ensuring that the release tab snaps into
the locked position.
NPB-1067-98F
VNswitch 900GV
2
1