Network Technologies 900GV - Manual (Page 40)

[1] Restart with Factory Defaults
4-6 Configuring the Module in a DIGITAL MultiSwitch 900
[1] Restart with Factory Defaults
This option reboots the module, causing its configured Nonvolatile Random Access
Memory (NVRAM) parameters to be initialized to factory default values followed by
a module reset. Allow approximately three minutes for the module to reboot and
complete self-test. To reset the module without losing the settings, use option
[2]
Restart with Current Settings .
CAUTION
This action deletes all configured settings and replaces them with factory default
values. All configuration settings will be lost.
The following example shows the dialog associated with this option:
==========================================================
RESTART WITH FACTORY DEFAULTS
* * * * * * * * * * * * * * * * * * * * * * * * * *
IMPORTANT! IMPORTANT! IMPORTANT!
This selection will delete the current configuration
settings and reset the system with the factory default
settings. All configuration settings will be lost.
==========================================================
Press Y to confirm [N]: <Return>
Press Return for Main Menu...
* * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
VNswitch 900GV - slot 3