Network Technologies 900GV - Manual (Page 41)

Configuring the Module in a DIGITAL MultiSwitch 900 4-7
[2] Restart with Current Settings
[2] Restart with Current Settings
This option resets the module but leaves the module’s configured nonvolatile
configuration storage parameters at their current values.
NOTE
Because this option restarts only the module, and leaves storage parameters
configured at their current values, the module’s restart process takes only 1
minute.
The following example shows the dialog associated with this option:
=============================================================
RESTART WITH CURRENT SETTINGS
This selection will reset your system with the current
configuration settings.
=============================================================
Press Y to confirm [N] : <Return>
Press Return for Main Menu...
VNswitch 900GV - slot 3