NetComm NP6800 - Manual (Page 31)

Rev.1 - YML655 www.netcomm.com.au
NP6800 - Wireless LAN Access Point Page 31
Authorization
Using this option the Administrator can change the passwords used in the community field of
the
Connect to AP window. A table is provided on page 40 to record the updated setting.
Commands Menu
Under this menu there are two options.
■ Reset Device - You can reset the AP.
■ Restore Defaults - You can restore the factory default values of the AP.
If you have lost the password to your Access Point, connect a USB cable and refer to the
section on Configuring your Access Point via USB to restore your settings.