Nokia FPS-8 - Manual (Page 11)

11 (30)
Pic 6 FPS-8 flash UI
Press ”Flash” button to start flashing.
It tries first to read phone type and product code to automatically determinate flash files. If reading
fails or appropriate files are not found, ”Flash File Selection” dialog is opened.
Pic 7 Flash file selection dialog
Flash files can be selected by using “Product” and “Product Code” combo boxes or by selecting “Set”
button.
When flash files are set, programming starts when ”OK” button is pressed.
More information and help can be found from dialogs help (press F1 or Help –button).
4.5.1 Programming “Dead-Phone”
Difference in a “Dead-Phone” programming comparing to normal programming is that none of the
needed information can be read automatically. So product and product code must be set manually. See
Pic 7 Flash file selection dialog.