Nokia FPS-8 - Manual (Page 8)

8 (30)
4 FPS-8 Usage
For successful use of FPS-8 also pc sw is needed. All needed sw modules are supplied with the
Phoenix software (Official service software for DCT-4) and with WinTesla sw (official service
software for DCT3 phones).
4.1 SW Installations
Before anything can be done, some installations must be made:
1. Install latest Phoenix software
2. Install latest data package for the phone.
3. Install latest Flash update package.
In the following instructions it is assumed that all these steps are already made.
Flash update package flash_update_01_00_048a.exe and phone sw files nhm75503.010/
nhm75503.01a are used only as an example in the following instructions.
4.2 FPS-8 Activation
Before FPS-8 can be successfully used for phone programming, it must be first activated. Fill in first
“FPS-8 activation request” sheet, which came with FPS-8 sales package and follow the instructions in
the sheet.
When activation file is received (e.g. 71007.in), copy it to BoxActivation –subdirectory under the
Phoenix directory. Start BoxActivation.exe and follow the instructions in the screen.
NOTE! Phoenix should be closed before running BoxActivation.exe.
Pic 2 BoxActivation Welcome screen