Nokia FPS-8 - Manual (Page 5)

5 (30)
1 Overview
FPS-8 is a programming device for DCT4 phones. When equipped with power
supply module ACS-10 it can also be used for programming latest DCT-3 phones.
Software for FPS-8 Prommer is delivered in one installation package file. When the new
installation package is installed to the control PC, the Phoenix (or WinTesla) updates the new files
to the FPS-8.
The PCSW controlling the FPS-8 is integrated in the Phoenix (DCT-4 phones) or
WinTesla (DCT-3 phones)
To be able to update the Prommer SW when using WinTesla, a separate prommer
support module (dll) must be installed.
FPS-8 can be equipped with extra memory modules to increase its memory
capacity.
NOTE!
When opening the prommer box or installing power / memory modules
all work Should be done in an ESD – safe environment!