NETGEAR WPNT511 User Manual
Page 12
User Manual for the NETGEAR RangeMax™ 240 Wireless Notebook Adapter WPNT511
Chapter 2-4
Introduction
v1.0, October 2005
Note: Secure Internet sites such as banks and online merchants use encryption security built into browsers
like Internet Explorer and Netscape. Any wireless networking security features you implement are in addition
to those already in place on secure Internet sites.
Connect to the
Internet over my
wireless
network.
1. Activate my
wireless link
and verify my
network
connection.
2. Open an
Internet
browser such
as Internet
Explorer or
Netscape
Navigator.
1. An Internet service such as
cable modem or DSL.
2. A network with a wireless
router or access point
connected to the cable/DSL
modem.
3. TCP/IP Internet networking
software installed and
configured on your PC based
on the requirements of the
Internet service provider
4. An Internet browser.
To use your WPNT511 in
Infrastructure Mode, see
, and locate
the section for your version of
Windows.
To set up a Profile, see.
For TCP/IP See the Web link to
“Internet Networking and TCP/IP
Addressing:” on page B-1
.
Exchange files
between a
wirelessly
connected
computer and
other computers
in a my
combined
wireless and
wired network.
1. Use the
Windows
Network
Neighborhood
feature to
browse for
computers in
the combined
wireless and
wired network.
2. Browse the
hard drive of
the target
computer in
the network in
order to locate
the directory or
files you want
to work with.
3. Use the
Windows
Explorer copy
and paste
functions to
exchange files
between the
computers.
1. The computer that you are
using to connect to the
wireless network needs to be
configured with:
• Windows Client and File
and Print Sharing
• The same Windows
Workgroup or Domain
settings as the other
Windows computers in the
combined wireless and
wired network.
2. Any Windows networking
security access rights such as
login user name/ password
that have been assigned in the
Windows network or to files
must be provided when
Windows prompts for such
information.
3. If so-called Windows ‘peer’
Workgroup networking is being
used, the drive, file system
directory, or file need to be
enabled for sharing.
For help with Windows
networking software, see the
Learn More About TCP/IP
Internet reference at the end of
this table.
Windows Domain settings are
usually managed by corporate
computer support groups.
Windows Workgroup settings
are commonly managed by
individuals who want to set up
small networks in their homes, or
small offices.
For TCP/IP See the Web link to
“Internet Networking and TCP/IP
Addressing:” on page B-1
.
For assistance with setting up
Windows networking, refer to the
PC Networking Tutorial on the
NETGEAR Resource CD and
the Help information provided in
the Windows system you are
using.
Table 2-1.
A Road Map for How to Get There From Here ...
If I Want To ... ? What Do I Do?
What’s Needed?
How Do I?