Wep encryption security, Wep encryption security -11 – NETGEAR WPNT511 User Manual
Page 39
User Manual for the NETGEAR RangeMax™ 240 Wireless Notebook Adapter WPNT511
Network Connections and Wireless Security
4-11
v1.0, October 2005
WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the WPNT511 Smart Wizard.
a.
Make sure the WPNT511 software is installed and the WPNT511 is fully inserted in an
available CardBus slot in your laptop computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a.
In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c.
In the Security section, select WEP.
Figure 4-8
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.