NETGEAR WPNT511 - Manual (Page 42)

User Manual for the NETGEAR RangeMax™ 240 Wireless Notebook Adapter WPNT511
4-14 Network Connections and Wireless Security
v1.0, October 2005
WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WPNT511 Smart Wizard.
a. Make sure the WPNT511 software is installed and the WPNT511 is fully inserted in an
available CardBus slot in your laptop computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA-PSK [TKIP].
For more information on WPA security, see the Web link to “Wireless Communications:”
on page B-1 .
Figure 4-10
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.