Nortel Networks CALLPILOT 555-7101-226 - Manual (Page 32)

Preinstallation requirements Standard 1.01
32 CallPilot
Installation overview
Introduction
This section provides an overview of the steps required to install the 703t
server and peripheral devices. For detailed instructions, see Chapter 3,
“Installing the server and connecting the peripheral devices.”
When you are finished, continue with the switch and server setup as
described in the document for your switch:
„
CallPilot Installation and Configuration Part 3: Succession 1000 System
and CallPilot Server Configuration (555-7101-510)
„ CallPilot Installation and Configuration Part 3: Meridian 1 and
CallPilot Server Configuration (555-7101-222)
Installation checklist
Step Description Check
1 Ensure that you have reviewed the “Installing CallPilot” section
in CallPilot Installation and Configuration Part 1: Installation
and Maintenance Overview (555-7101-210), and completed
stage 1 of the “Installation checklist.”
❒
2 Unpack the server, and ensure you have all the items you need
(see page 35).
Complete the following checklists that are provided in
CallPilot Installation and Configuration Part 1: Installation
and Maintenance Overview (555-7101-210):
„ “CallPilot software media and documentation checklist”
„ “CallPilot server hardware checklist”
❒
3 Remove the server cover, and inspect the interior (see pages 37
and 40).
❒