NISSAN 2011 Maxima - Manual (Page 189)

Black plate (190,1)
08NJ-N Edited: 2010/ 10/ 18
9-24 Voice recognition
“Plan View Map”.
4. Voice feedback will be provided when the
command is accepted, and the map is
displayed in 2D (Plan View).
Example 2: Setting a destination using
places list
1. Push <TALK > located on the steering
wheel switch.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [ ] to [ ], speak
“Places”.
4. If a route is already set, choose “Near
Current Location”, “Along Route” or “Near
Destination”.
5. After the tone sounds and the icon on the
screen changes again, speak “Along Route”.
6. Voice feedback will be provided when the
command is accepted, and the list of places
of interest categories appears.
7. After the tone sounds and the icon on the
screen changes again, speak “Two”.
8. Voice feedback will be provided when the
command is accepted, and the list of places
of interest in the category specified in the
previous step appears.
9. After the tone sounds and the icon on the
screen changes again, speak “One”.
10. Voice feedback will be provided when the
command is accepted, and the system
starts calculating a route to the selected
facility.