NISSAN 2011 Maxima - Manual (Page 69)

Black plate (70,1)
08NJ-N Edited: 2010/ 10/ 18
4-10 Setting destination
8. Highlight the preferred sorting order and
push <ENTER>. A list screen is displayed.
9. Highlight the preferred destination facility
from the list, and then push <ENTER>.
INFO:
. By highlighting [Sort] and pushing
<ENTER>, sorting options can be se-
lected to re-sort the list.
. The search conditions can be changed
by highlight [Refine].
. By highlighting [Ratings] and pushing
<ENTER>, an explanation of the ZAGAT
ratings can be displayed.
10. The entire route is shown on the map.
Highlight [Start] after confirming the location
of the displayed destination and pushing
<ENTER>. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc..
“Procedures after setting destination”
(page 5-2)
*
C 2009 Zagat Survey, LLC. Zagat Survey is a
registered trademark of Zagat Survey, LLC
SETTING HOME AS DESTINATION
The home location can be set as the destination
to which the system calculates a route. This
function is especially useful when searching for
a route to return to the home location.
1. Push <DEST>.
2. Highlight [Home] and push <ENTER>.
3. The home location is displayed and set as
the destination.