Voice recognition, Voice recognition -9 – NISSAN 2011 Maxima User Manual
Page 220
Black plate (221,1)
08NJ-N Edited: 2010/ 10/ 18
Symptom
Possible cause
Possible solution
The system does not accept the voice
command.
or
The system accepts the voice com-
mand incorrectly.
The interior of the vehicle is too noisy.
Close the windows or have other occupants be
quiet.
The volume of the voice is too low.
Speak louder.
The volume of the voice is too loud.
Speak softer.
Pronunciation is unclear.
Speak clearly.
The voice command is given before the voice recognition system is
ready.
Push <TALK
> on the steering wheel switch,
and speak a command after the tone sounds.
8 seconds or more have passed after pushing <TALK
> on the
steering wheel switch.
Make sure to speak a command within 8 seconds
after the beep tone sounds.
Only a limited range of voice commands is usable for each screen.
Use a correct voice command appropriate for the
current screen.
The system cannot be operated.
The soft top is not closed (for Roadster and Cross Cabriolet models). Close the soft top.
INFO:
For the best recognition, speak appropriate
commands. Command lists are available earlier
in this manual.
Standard Mode:
“Command List” (page 9-6)
Alternate Command Mode:
“Command List” (page 9-14)
Troubleshooting guide
11-9
VOICE RECOGNITION